|
|
Uses: SHEET ZAP Is a specialty CA adhesive developed specifically for the hobby industry. The thick formula (somewhere between SLO ZAP and ZAP GEL) and slow cure time are perfect for sheeting wings or planking fuselages. Boat modelers will like this glue too. The thicker formula allows you to apply a thin bead right on top of ribs or formers as small as 1/16 inch thick without running over the edges. The slow cure time means you can apply it over the entire wing or fuselage section and have plenty of time to position the sheeting. This is a specialty glue and mostly used in modeling, wood working, antique furniture repair shops will like the extra working time. Helpful Hints: For maximum strength let SHEET ZAP cure on its own, best accomplished by providing some light to medium clamping pressure on the pieces to be joined. SHEET ZAP can be used in conjunction with ZIP KICKER to speed the cure time. Spray ZIP KICKER on the sheeting and let dry. Note: When spraying ZIP KICKER, make sure it does not get on any of the parts you will be applying the glue to. When the sheeting is dry apply SHEET ZAP to the ribs or formers, then join the two. SHEET ZAP is not for use on foam. For critical applications test sample joints for designed strength requirements. |