| 5 | Part#: | VXR-465030 |
20110118 00012975 |
| 6 | Description: | MUFFLER SCREWS 40mm LONG (2) - 46PRO,52PRO |
20110118 00012976 |
| 20100307/23:08/kps... These bolts are supplied with the engine for the stock muffler and sold as spare parts. When using the 10mm muffler spacer (#VXR-46400010) to space the muffler further from the engine these bolts are not long enough and extended bolts (#VXR-465030E) are required. | |||
| 8 | Price List & Web Category: | VXR Products ENGINES RC AIR PARTS 46&52PRO (VX2500) |
20110118 00012978 |
| 13 | Quantity in Package: | 2 |
20100301 00012983 |
| 14 | Length Not Including Head: | 1.6 in. (40 mm) |
20100301 00012984 |
| 15 | Diameter Not Including Head: | .118 in. (3.000 mm) |
20100301 00012985 |
| 16 | Head Type: | Allen Socket Head |
20100301 00012986 |
| 17 | Threads Begin: | .83 in. (21.00 mm) from Head |
20100301 00012987 |
| 18 | Threads End: | 1.57 in. (40.00 mm) from Head |
20100301 00012988 |
| 19 | Color: | Black |
20100301 00012989 |
| 20 | Washers Included: | 0 |
20100307 00012990 |
| 21 | PRECISION: | As stated below |
20100307 00012997 |
| In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice Within the limitations of this Condition of Use and the Liability Disclaimer, the data published here is intended to meet the following standards of precision. | |||
| 26 | Units of Measure: | All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial. |
20070106 00003923 |
| 27 | In general, measurements are accurate to within: | + - 3% except + - .30 for measurements of magnitude 10.0 or less. |
20070106 00003916 |
| 28 | Distances such as length, width, depth, thickness etc are measured to the nearest: | 1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less |
20070106 00003917 |
| When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision. | |||
| 29 | Weights and Mass are measured to the nearest: | 1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less |
20070106 00003924 |
| 30 | Volumes related to fluids are measured to the nearest: | 1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less |
20070106 00003925 |
| 31 | Volumes related to non-fluids are measured to the nearest: | .01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less. |
20070106 00003926 |