| 5 | Part#: | VXR-465030E |
20100316 00012950 |
| 6 | Description: | MUFFLER SCREWS 50mm EXTENDED (2) - 46PRO,52PRO |
20100316 00012951 |
| 20100307/10:36/kps... These bolts are aftermarket bolts not supplied with the engine or with the stock muffler. These extended bolts are 10mm longer than the stock muffler bolts that come with the VMAX 46PRO and 52PRO engines. When using the 10mm muffler spacer (#VXR-46400010) to space the muffler further from the engine these extended bolts are required. These bolts can also be used as replacements for the standard muffler bolts (#VXR-465030) and in conjunction with the supplied flat and lock washers they will work to secure the stock muffler (#VXR-464000) to the engine with or without the muffler spacer in place. | |||
| 8 | Price List & Web Category: | VXR Products ENGINES RC AIR PARTS 46&52PRO (VX2500) |
20100316 00012953 |
| 13 | Quantity in Package: | 2 |
20100301 00012963 |
| 14 | Length Not Including Head: | 2.0 in. (50 mm) |
20100301 00012964 |
| 15 | Diameter Not Including Head: | .118 in. (3.000 mm) |
20100301 00012965 |
| 16 | Head Type: | Allen Socket Head |
20100301 00012966 |
| 17 | Threads Begin: | 1.22 in. (31.00 mm) from Head |
20100301 00012967 |
| 18 | Threads End: | 1.97 in. (50.00 mm) from Head |
20100301 00012968 |
| 19 | Color: | Black |
20100301 00012969 |
| 20 | Washers Included: | 2 Flat and 4 Lock |
20100301 00012970 |
| 21 | PRECISION: | As stated below |
20100306 00012996 |
| In using this information, the user accepts all responsibility for the use of this information and accepts all liability for such use as stated at the following link: Liability Disclaimer & Copyright Notice Within the limitations of this Condition of Use and the Liability Disclaimer, the data published here is intended to meet the following standards of precision. | |||
| 26 | Units of Measure: | All measurements are taken in metric units. Imperial units are derived rather than measured. In cases where two or more numbers are used to compute a result, the calculation is done in metric and the result converted to imperial. |
20070106 00003923 |
| 27 | In general, measurements are accurate to within: | + - 3% except + - .30 for measurements of magnitude 10.0 or less. |
20070106 00003916 |
| 28 | Distances such as length, width, depth, thickness etc are measured to the nearest: | 1 mm. When converted to imperial, inches are calculated to the nearest .01 in. except to the nearest .001 in. for distances approx 30 mm or less |
20070106 00003917 |
| When measuring wire diameter, machined metal parts etc where a micrometer or caliper is used, measurements are taken to the precision of the measuring instrument and expressed using more significant figures. The presence of additional digits to the right of the decimal is used to denote this higher level of precision. | |||
| 29 | Weights and Mass are measured to the nearest: | 1 gram. When converted to imperial, pounds and ounces are calculated to the nearest .01 lb. or .01 oz. except to the nearest .001 lb. or the nearest .001 oz. for weights of approx 500 g or less |
20070106 00003924 |
| 30 | Volumes related to fluids are measured to the nearest: | 1 ml or 1 cc. When converted to imperial, volumes of fluids are calculated to the nearest .01 oz. except to the nearest .001 oz. for volumes of approx 500 ml or less |
20070106 00003925 |
| 31 | Volumes related to non-fluids are measured to the nearest: | .01 cbm (cubic metre). When converted to imperial, volumes of non-fluids are calculated to the nearest .01 cubic ft. except to the nearest .001 cubic ft. for volumes of approx .1 cbm or less. |
20070106 00003926 |