| 1 | Part#: | VMA-C210YTV |
20080115 00012176 |
| 6 | Source Data - Horiz Stabilizer Elevator Area: | 41.60 sq in. (268 sq cm) |
20070506 00012181 |
| 7 | Dimensions: | Please See Note |
20070505 00012182 |
| The dimensions of the Vertical Stabilizer include the Rudder unless otherwise noted. The Rudder Quantity is the number of rudder segments. This is usually 1 and occasionally 2. i.e. 1 for 1 rudder, 2 for 2 rudders in the case of two vertical stabilizers on one model. The Rudder Length is expressed as the length per rudder segment. The Rudder area is expressed as the total of the area of all rudder segments. | |||
| 8 | Terminology: | Please See Note |
20070505 00012183 |
| The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage. | |||
| 11 | Vertical Stabilizer Location: | Vertical Slot in Top of aft end of Fuselage |
20070505 00012186 |
| 12 | Vertical Stabilizer Quantity: | 1 |
20070505 00012187 |
| 13 | Vertical Stabilizer Height Fuse to End Of Tip: | 5.55 in. (141 mm) |
20070503 00012188 |
| 14 | Vertical Stabilizer Height (effective): | 3.15 in. (80 mm) |
20070503 00012189 |
| 15 | Vertical Stabilizer Chord Maximum: | 6.50 in. (165 mm) |
20070503 00012190 |
| 16 | Vertical Stabilizer Chord at tip end of Rudder: | 2.68 in. (68 mm) |
20070503 00012191 |
| 17 | Vertical Stabilizer Chord (effective): | 4.92 in. (125 mm) |
20070503 00012192 |
| 18 | Vertical Stabilizer Area: | 15.50 sq in. (100.00 sq cm) |
20070503 00012193 |
| 19 | Vertical Stabilizer Area relative to Wing Area: | 3.93 % |
20070506 00012194 |
| 20 | Vertical Stabilizer Area relative to Wing Area without wing saddle: | 4.19 % |
20070506 00012195 |
| 21 | Vertical Stabilizer Airfoil Shape: | Slab |
20070503 00012196 |
| 22 | Vertical Stabilizer Thickness Maximum: | .169 in. (4.3 mm) |
20070503 00012197 |
| 23 | Vertical Stabilizer Taper along Leading Edge: | Yes |
20070503 00012198 |
| 24 | Vertical Stabilizer Taper along Trailing Edge: | Yes. Rounded |
20070503 00012199 |
| 25 | Vertical Stabilizer Material: | Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut. |
20070503 00012200 |
| 26 | Vertical Stabilizer Construction Method: | Built Up |
20070503 00012201 |
| 27 | Vertical Stabilizer Construction Adhesive: | PVA, Cyanoacrylate and Epoxy |
20070503 00012202 |
| 28 | Vertical Stabilizer Sheeted Fully: | No |
20070503 00012203 |
| 32 | Vertical Stabilizer Attaches to Fuselage via: | Slot in Fuselage and Adhesive |
20070505 00012207 |
| 33 | Vertical Stabilizer Adhesive Required: | 30 Minute Epoxy |
20070505 00012208 |
| 34 | Vertical Stabilizer Requires Struts: | No |
20070505 00012209 |
| 35 | Vertical Stabilizer Rudder Factory Installed: | Yes |
20070505 00012210 |
| 36 | Vertical Stabilizer Rudder Quantity: | 1 (i.e. not split, not dual rudders) |
20070505 00012211 |
| 37 | Vertical Stabilizer Rudder Length (effective): | 5.91 in. (150 mm) |
20070503 00012212 |
| Vertical Stabilizer Rudder Length is 196 mm at the hinge line. The Rudder Length is rounded at the trailing edge. | |||
| 38 | Vertical Stabilizer Rudder Chord (effective): | 1.97 in. (50 mm) |
20070503 00012213 |
| The Vertical Stablizer Rudder Chord varies continuously due to rounded edges throughout. | |||
| 39 | Vertical Stabilizer Rudder Area: | 11.63 sq in. (75.00 sq cm) |
20070503 00012214 |
| 40 | Vertical Stabilizer Rudder Area relative to Wing Area: | 2.94 % |
20070506 00012215 |
| 41 | Vertical Stabilizer Rudder Area relative to Wing Area without wing saddle: | 3.14 % |
20070506 00012216 |
| 42 | Vertical Stabilizer Rudder Area relative to Vertical Stabilizer Area: | 75.00 % |
20070503 00012217 |
| 43 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Area: | 15.79 % |
20070507 00012218 |
| 44 | Vertical Stabilizer Rudder Area relative to Horizontal Stabilizer Area without saddle: | 16.42 % |
20070507 00012219 |
| 45 | Vertical Stabilizer Rudder Area relative to Horiz Stabilizer Elevator Area: | 27.94 % |
20070506 00012220 |
| 46 | Vertical Stabilizer Rudder Hinges per Rudder: | 2 |
20070503 00012221 |
| 47 | Vertical Stabilizer Rudder Hinge Type: | Flexible Live Low Gap |
20070503 00012222 |
| 48 | Vertical Stabilizer Rudder Hinge Material: | Proprietary Super Strong |
20070503 00012223 |
| 49 | Vertical Stabilizer Rudder Hinge Adhesive: | Cyanoacrylate |
20070503 00012224 |
| 51 | Vertical Stabilizer Rudder Servo Required: | Yes 1 Standard |
20070503 00012226 |
| 52 | Vertical Stabilizer Rudder Servo Location: | Tray in centre of fuselage |
20070503 00012227 |
| 20070503/19:31/ | |||
| 53 | Vertical Stabilizer Rudder Servo Mounting Method: | Tray |
20070505 00012228 |
| 58 | Vertical Stabilizer Color Left Schema: | Monochrome with small Cub graphic |
20070503 00012233 |
| 59 | Vertical Stabilizer Color Left Main: | Yellow |
20070503 00012234 |
| 60 | Vertical Stabilizer Color Left Trim: | Red & Brown Cub graphic |
20070503 00012235 |
| 63 | Vertical Stabilizer Color Left vs Right: | Similar |
20070503 00012238 |
| 64 | Vertical Stabilizer Color Right Schema: | Monochrome with small Cub graphic |
20070503 00012239 |
| 65 | Vertical Stabilizer Color Right Main: | Yellow |
20070503 00012240 |
| 66 | Vertical Stabilizer Color Right Trim: | Red & Brown Cub graphic |
20070503 00012241 |
| 69 | Vertical Stabilizer Weight: | .022 lbs (10 g) |
20070503 00012244 |