VMAR TWIN OTTER 09-15 ARF ECS - WING - WHITE

 

PRODUCT INFORMATION

VMA-T210WW

VMAR TWIN OTTER 09-15 ARF ECS - WING - WHITE

1	Part#:	VMA-T210WW	20090716 00010709
2	Dimensions:	Please See Note	20070426 00010710
The dimensions of the Wing include the mounting Saddle plus any Ailerons, Flaperons, Flaps or other control surfaces unless otherwise noted. The Aileron Quantity is the number of aileron segments. This is usually 2 with one aileron on the right wing panel plus one aileron on the left wing panel. The Aileron Length is expressed as the length per aileron segment. The Aileron Area is expressed as the total of the area of all aileron segments. Flaperons by design have the same specifications as ailerons. Flap dimensions are denoted in the same manner as ailerons. Flap Quantity is usually 2 (one on the left wing panel plus one on the right wing panel). Flap Length is the length of each flap segment and Flap Area is expressed as the total of the area of all flap segments.
3	Terminology:	Please See Note	20070426 00010711
The term "effective" is used to desribe the size of an object which is tapered or irregularly shaped. The term "chord" describes the linear distance from the leading edge to the trailing edge through a wing or control surface. The terms "saddle" and "saddle area" describe that portion of a flying surface such as the center section of a wing or horizontal stabilizer where it intersects the fuselage.
6	Wing Location:	Above Fuselage	20070426 00010714
7	Wing Span Tip to Tip:	61.34 in. (1558 mm)	20070426 00010715
8	Wing Span (effective):	61.34 in. (1558 mm)	20070426 00010716
9	Wing Chord at Root:	7.00 in. (177.8 mm)	20070426 00010717
10	Wing Chord at outboard end of Aileron:	7.00 in. (177.8 mm)	20070426 00010718
11	Wing Chord (effective):	7.00 in. (177.8 mm)	20070426 00010719
12	Wing Area:	429.37 sq in. (2770.12 sq cm)	20070426 00010720
16	Wing Area without Saddle:	429.37 sq in. (2770.12 sq cm)	20070426 00010724
17	Wing Airfoil Shape:	Semi Symmetrical	20070429 00010725
21	Wing Taper along Leading Edge:	None	20070426 00010729
22	Wing Taper along Trailing Edge:	None	20070426 00010730
24	Wing Material:	Balsa Wood & Light Plywood. Ribs, Formers and Sheeting are Laser Cut. Sticks, Stringers & Strips are Saw Cut.	20070426 00010732
25	Wing Construction Method:	Built Up	20070426 00010733
26	Wing Construction Adhesive:	PVA, Cyanoacrylate and Epoxy	20070426 00010734
31	Wing Ribs Capped:	Yes	20070426 00010739
32	Wing Plugs In to Fuselage:	No	20070426 00010740
35	Wing Requires Struts:	Yes	20070426 00010743
36	Wing Spar Joiner Quantity:	1 (Please See Note)	20070428 00010744
In some markets the wing halves have been joined by the factory and the wing then shipped in one piece. Where a one piece wing has been supplied, the individual wing halves, wing spar joiner(s), alignment pins, center joint trim tape and other components used to join wing halves together have already been incorporated by the factory into the one piece wing.
37	Wing Spar Joiner Material:	Wood	20070426 00010745
46	Wing Joint Adhesive:	30 Minute Epoxy	20070426 00010754
47	Wing Joint Trim Tape:	Yes Clear	20070426 00010755
48	Wing Ailerons Factory Installed:	Yes	20070426 00010756
49	Wing Ailerons Quantity:	2	20070426 00010757
50	Wing Aileron Type:	Strip (2)	20070426 00010758
57	Wing Aileron Hinge Type:	Flexible Live Low Gap	20070426 00010765
58	Wing Aileron Hinge Material:	Proprietary Super Strong	20070426 00010766
59	Wing Aileron Hinge Adhesive:	Cyanoacrylate	20070426 00010767
60	Wing Aileron Hinges Pinned:	Yes	20070426 00010768
61	Wing Aileron Servo Required:	Yes 2 Sub-micro	20070426 00010769
62	Wing Aileron Servo Location:	Near motor nacelles outboard in Wing	20070426 00010770
63	Wing Aileron Servo Rails:	Yes in Servo Cavity	20070426 00010771
65	Wing Aileron Servo Wiring Tube:	Yes	20070426 00010773
66	Wing Ailerons Flaperon Ready with Computer Radio:	Yes	20070426 00010774
67	Wing Flaps Factory Installed:	No	20070428 00010775

20120830 03:59:21 PST. Subject to Change Without Notice.

Copyright Richmond RC Supply Ltd. VMA-T210WW_spec.htm